1. Using the double arm pneumatic/Hydraulic opening and closing die, the bottom mold linkage structure, with high voltage compensation mode, to achieve high speed, high precision, high stability.

2. Step servo motor and Germany cylinder tensile system, improve the blowing speed.

3. Energy efficient semi open type heating system, compared to peer energy saving of more than 30%.

4. The using states Parker high pressure blowing valve, flow rate, fast response speed, improve unit capacity of up to 1500 b/h, combined with high-pressure gas recovery system,recyclable 20%-40% high pressure gas, saving energy and environmental protection.

5. Standardized spare parts supply system to ensure the stability of equipment operation, reduce maintenance costs

6. Man-machine interface, linear structure, simple operation, convenient, fast, high level of automation

Fully automatic bottle system, can be connected with the conveyor, belt(air duct) , with filling system

Model				ZP800-9		ZP800-6	ZP800-4		ZP800-2	ZP2000-6	ZP2000-4		ZP2000-2		ZP2500-2
Mold	Clamping force	Kg/f	60000		48000	32000		16000	60000	48000	16000		16000
	Mold thickness	mm	200		200	190		180	200	200	190		200
	Clamping stroke	mm	260		260	260		260	320	320	320		320
	Bottom stroke	mm	50		50	50		50	50	50	50		50
	Cavity pitch	mm	76.2		76.2	76.2		76.2	114.3	114.3	114.3		130
	Number of cavities	cavities	9		6	4		2	6	4	2		2
Bottle	Max container volume	ltr	0.6		0.6	0.6		0.6	2	2	2		2.5
	Max neck diameter	mm	38		38	38		38	38	38	38		38
	Max container diameter	mm	68		68	68		68	105	105	105		120
	Max container height	mm	260		260	260		260	320	320	320		320
	Carriage Unit	pcs	150		108	76		48	100	72	48		64
Theortical output		Pcs/hr			9000-10000	6000-7000		3500-4000	1800-22000	4000-5000	3000-4000		1800-2000	1300-1500
Electric	Perature increasement part	Group	6		4	4		2	6	4		2	2
	Levels of infrared lamps	Number of levels	8		8	8		8	10	10		10	10
	Total power	kw	98		66	66		34	125	82		34	42
	Heating power	kw	32		26	22		12	40	36		18	20
Air	Operating pressure	Kgf/cm²	8		8	8		8	8	8		8	8
	Low pressure Air consuming	Ltr/min	2000		2000	2000		2000	2000	2000		2000	2000
	Blowing pressure	Kgf/cm²	35		35	35		35	35	35		35	35
	High pressure Air consuming	Ltr/min	8000		6000	4000		2000	8000	6000		2000	4000
Freezing device	Operating pressure	Kgf/cm²	2--4		2--4	2--4		2--4	2--4	2--4		2--4	2--4
	Temperature	℃	10--12		10--12	10--12		10--12	10--12	10--12		10--12	10--12
	Consuming	Kcal/hr	11400		7600	7600		5400	11400	11400		5400	5400
	Flow rate	Ltr/min	60		45	45		45	60	68		30	30
Cooling device	Operating pressure	Kgf/cm²	5--6		5--6	5--6		5--6	5--6	5--6		5--6	5--6
	Temperature	℃	25		25	25		25	25	25		25	25
	Consuming	Kcal/hr	45000		45000	45000		30000	54000	45000		30000	30000
	Flow rate	Ltr/min	150		150	150		100	150	150		100	100
Machine	Size	mm	586020601930		440019201930	366018401930		225018002100	590021002100	405018202100		300018001900	326021601900
	Weight	T	8		6.5	4.5		3	8	5.5		3	3.5

Product Tags:

Automatic PET bottle blow molding machine plastic bucket bottle stretch injection blow moulding machine

Automatic mineral water pet bottle molding blowing making machine

Automatic pet bottle blowing molding machine Servo motor drive high speed

Standard automatic pet bottle making blowing molding machine

Automatic pet bottle blowing molding making machine for hot filling liquid

Automatic high speed pet bottle blowing molding making machine for daily chemical liquid

Automatic high speed small pet bottle making blowing molding machine

Automatic wide mouth pet bottle making blowing molding machine

Automatic oil, water big pet bottle making blowing machine

Automatic pet bottle with handle making blowing machine

Fully automatic pp bottle blowing molding making machine

Semi automatic pet bottle making blowing molding machine

Automatic pet preform injection molding machine

Automatic juice pet bottle molding making blowing molding machine

Automatic PET bottle blow molding machine plastic bucket bottle stretch injection blow moulding machine

pet bottle blow molding machine

plastic bottle blow molding machine

bottle blow molding machine